What is the height limit for trucks
Release time:
2025-04-23 16:27
Heavy/medium trucks and semi-trailers are restricted to a height of 4 meters, container trucks are restricted to a height of 4.2 meters, and other trucks carrying goods are restricted to a height of 2.5 meters
According to China's current regulations, the height limit for trucks varies depending on the model and type of cargo load, as follows.
I. Height limits for major vehicle models
Heavy/medium goods vehicles and semi-trailers
The height of a loaded vehicle from the ground level shall not exceed 4 meters.
If the vehicles are used for road operation (e.g. freight trucks), they are required to be installed with tachographs complying with the national standards in order to monitor the driving status.
Container Transportation Vehicles
When loading containers, the maximum total height (including containers) is 4.2 meters.
Such vehicles usually have a body height of 1.2-1.5 meters above the ground, but special transport vehicles (e.g., low-flatbed trucks) may be lower (0.4-0.8 meters).
Other motor vehicles carrying goods
including light trucks, etc., have a height limit of 2.5 meters. The empty height of light trucks is usually between 2.2 and 2.6 meters.
Second, the legal basis and penalty provisions
Source of law: the above standards are based on Article 54 of the Regulations of the People's Republic of China on the Implementation of the Road Traffic Safety Law.
Consequences of violation:
Driving over height will face 1 point deduction and a fine of 20-200 RMB;
If overloading more than 30% at the same time, the demerit points may rise to 6 points.
Third, the practical application of notes
Measurement base: heights are calculated from the ground, including cargo and the vehicle itself.
Special scenarios: such as passenger car luggage rack loaded, the roof height shall not exceed 0.5 meters, the total height is still subject to the 4-meter limit.
Summary: truck height limit should be strictly differentiated between models, before transport should verify the approved parameters of the travel certificate, to avoid the safety hazards or legal risks arising from the super-high.
Previous article
More information
What is the reason why the brake pads of heavy trucks are not wear-resistant?
Due to friction, the brake pads of heavy trucks will gradually wear out. Generally speaking, the lower the cost, the faster the brake pads will wear out. The brake pads should be replaced in time after the friction material is used, otherwise the steel plate and the brake disc will directly contact, and eventually the braking effect will be lost and the brake disc will be damaged. What is the reason why the brake pads of heavy trucks are not wear-resistant?
Several brake pad problems of heavy truck brake pads
This may be caused by the thinning of the brake pads of heavy trucks, potholes in the brake pads, foreign matter in the brake pads or rust on the brake discs, etc. Generally, the abnormal noise of the brake will be alleviated by stepping on a few more feet.
Do you understand the knowledge in truck brake pads?
Trucks are the main force in my country's logistics and freight industry, and their driving trajectories can be anywhere in the country. For truck drivers and truck bodies, every thousand miles of transportation is a very difficult test. Because the truck's carrying tonnage is relatively large, this has greater requirements for the safety of the vehicle, and many old drivers will choose to make a fuss on the brakes of the truck. Below, truck brake pad manufacturers will explore the knowledge of truck brakes weighing dozens of tons with everyone.
The dangers of overloading trucks
The hazards of overloading trucks mainly include the following aspects:
What are the load capacities of the different sizes of vans?
There are significant differences in the load capacity of each size of truck, which are described below:
Is there a difference between different types of truck loads?
Significant differences do exist between different types of trucks for cargo transportation. Different types of trucks are suitable for different cargo transportation needs due to their design features and performance differences.